The Steiner DBAL-D2 features an infrared LED illuminator and two laser aiming devices all in one integrated, rail-mounted platform. This highly collimated beam significantly enhances night vision performance and offers an eye-safe means of illuminating distances greater than 1000 m.
The infrared (IR) illuminator is adjustable from 2° to 30° with a simple twist, meaning that flooding large close-in areas or concentrating the IR illumination beam on a target that’s further away takes only a few seconds. Even better, the adjustable power settings on the illuminator allow you to conserve battery life and tailor your setup to ensure the right amount of illumination is available at the touch of the activation switch.
The DBAL-D2’s visible and IR laser pointers are co-aligned; among other things, one major advantage of this is that zeroing the D2 is easily achievable during the daylight hours by simply zeroing the visible laser – once the visible laser is zeroed, the IR laser is zeroed as well. And, if the platform already has a zeroed optic, the zeroing procedure for the visible laser can be as easy as moving the laser aiming point to the location of the zeroed reticle on target.
Switching with the DBAL-D2 is evolved – the activation switch (or included remote pressure pad) can be quickly set to fire the visible laser (high and low settings), the IR laser, the IR illuminator, or both the IR illuminator and laser together (high and low settings). Integrated switching for the laser and illuminator means that there are no separate actions required to both illuminate and identify a target and locate the platform’s point of aim; under low- or no-light conditions, reducing the complexity of operation is critical.
- IR Aiming Laser (<0.7 mW, Class 1)
- Adjustable IR Illuminator (<600 mW, Eye Safe LED)
- Visible Green Laser (<5 mW, Class 3a)
- Powered by a single CR123A battery
- Windage & Elevation Adjustments
- Momentary and continuous modes
- Integrated Activation Switch
- Quick Release HT Mount
- Activation / Mode Selector Switch
- Remote Cable Port
- Aircraft Grade Aluminum Construction
- Mil-Spec Type III hardcoat anodized
- Available in Black or Desert Sand colors
- Weight 12.5 oz.
- Submersible to 5m
- 2 Year Warranty